It’s easy enough for any handyman or DIY fan to understand the need for a table saw in the workshop. They’re just too useful to do without. What’s a lot harder to justify is spending too much money on one, especially for those who aren’t well-off or for hobbyists who just like to take on projects every now and then.
But the truth of the matter is that unless you’re a professional contractor who insists on spending top dollar for top equipment, you don’t really have to spend all that much. It’s not difficult to find the best table saw under $500 which can suit your needs as well as your budget.
Certainly you can start your search with the models we have here. And chances are that your search may end here as well.
Let’s start the list with an obvious contender for the title, as the DW745 is a top seller among all table saws online.
It comes with a 10-inch blade, which is a more practical choice than a 12-inch blade since very few of us really work with very large work pieces too often.
This blade is powered by a 15-amp motor able to offer a speed of 3850 rpm, which means that you can get clean cuts quickly even if you work with engineered or hardwood lumber.
The rails allow for quick and accurate fence adjustments. The telescoping design of this saw move the rails out to 20 inches so it can rip full sheets of materials. At 90 degrees, the cut depth reaches 3⅛ inches while at 45 degrees you still get a cut depth of 2¼ inches.
It also comes with what Dewalt calls its Site-Pro Modular Guarding System. This basically allows you to adjust guarding components without the need for tools. So with this system, it’s easy to set up the table for a wide range of different jobs. It has a metal roll cage base, which is much sturdier and more stable than a plastic base.
The table surface is even coated to reduce the friction, which lead to a better quality for your cuts. The 2.5-inch dust collection port also lets you connect to a shop vacuum so you can minimize the dust and keep your workplace clean.
Since the rail has a telescoping design, it retracts so the design is more compact. That makes it more portable, and besides, it weighs just 45 pounds. There’s even on-board storage for the guarding components so you have a handy place to put them when you’re not using them.
As for its durability, just remember it’s a Dewalt. That means it has a 3-year warranty and you get free service for a year. You also have 90 days to try it out and if for some weird reason (which you don’t have to explain) you don’t like it, you can return it and get your money back. Judging by the rave reviews this model tends to get, that’s a very rare occurrence.
The DWE7480XA is another great table saw option from Dewalt. While you can get it without a stand, it better if you do.
This means you get a stand that’s precisely made for this table saw, and besides it’s just $20 extra.
The blade can also be adjusted up to 45 degrees. It also comes with the rack and pinion telescoping fence rails that allow you to adjust the fence quickly and accurately.
Again you also have the Site-Pro Modular Guarding System, which offers various guarding components that can come handy for different applications. Other familiar features include the 2.5-inch dust port, the metal roll cage base, the on-board storage for the guarding components, and the table coated to reduce friction.
But this time the 15-amp motor offers a speed of 4800 rpm, and the rip capacity is increased to 24.5 inches. The rear feet are also adjustable so that you can level the saw if your workshop floor is a bit uneven. It’s still compact at 26.5 x 25.8 x 17.5 inches, and even with the stand you should have much trouble moving it from one spot to another.
Setting it up is easy as the manual is detailed. Again, let’s mention the Dewalt warranty: 3 years limited warranty, 1 year free service, and 90 days for your money back.
Bosch makes a point of putting the word “portable” in its product name for the GTS1031, because it really is portable. It really is designed to be more mobile than your average table saw.
You can use its single handle to lift it up yourself, and this handle is actually ergonomic and soft when you grasp it. You’ll then find that its 52-pound weight is nicely balanced for lifting.
With this terrific center of gravity, it won’t be awkward to move it from place to place in the jobsite.It also has handles on the side, so that it’s easier to load the table saw in your truck. The base will stack on the side, which makes it easier to transport and stable when you store it away.
Yet despite its portable nature, it still has an all-steel base that can hold up to workshop and jobsite conditions. It offers storage for various tools and components under the table, and the base has rubber feet for better stability. It also has a tool-free dust chute clear-out to make maintenance easier.
But how does it cut? You be the judge. It has a 4-hp motor that delivers a speed of up to 5000 rpm. While it’s compact for easier transport, the 20 by 22.5-inch tabletop still offers 18 inches of rip capacity. The bevel angle range goes from -2 to 47 degrees. At 90 degrees the cut goes 3⅛ inches deep, while at 45 degrees the cut depth is 2¼ inches.
What’s more, its fence is designed to be the best and most accurate in its class. The fence just glides along the rail so you can use a single hand to move and lock into place. You also get superior control with your cutting, which boosts your safety as well as the accuracy for your cuts.
So all in all, you have a mobile cutter that offers extremely accurate cuts. If you like to keep things moving, this one’s for you.
Yep, it’s another Dewalt. As it should be obvious by now, Dewalt delights in delivering high quality power tools at very reasonable prices.
However, this one is the most expensive of the bunch, as it comes in at just a hair short of the magic $500 price point. So let’s explain the higher price.
Aside from all the other features we’ve already repeated, here the rip capacity is boosted up to 28 inches.
The table is substantial, as it measures 26.25 by 22 inches.It’s probably easier to explain its advantages to various types of people who will use it. With this, cabinet installers and hardwood floor installers can rip filler boards.
Deck builders can use it for ripping deck boards, rail cap, and railing. Remodelers and hobbyists can rip framing lumber and work with 4 by 8 feet sheet material.
Trim carpenters will have a lot of use for this. It can rip molding and framing lumber. It can be used for wainscoting. It can be used to rip and cross cut materials for framing books shelves and TV cabinets. Home hobbyists can use it to rip and cross cut materials for tenons, mortise, rabbets, and dadoes. It can size materials up to 3 inches thick.
When you see just how useful this thing is, you can understand the price discrepancy with the other models on this list much better. But it’s still affordable, as it’s still less than $500.
Here’s another nice table saw you can get for much less than $500. The 15-amp motor also delivers 5000 rpm speed, so you know you have ample power.
You can use this for all kinds of workshop tasks, including crosscutting smaller work pieces, ripping long boards, and making miter or bevel cuts.
The rip fence is self-aligning and the highly visible (SKIL calls it “EZ View”) measurement system helps make sure that your cuts are accurate.
The bevel range is from 2 to 47 degrees. At 90 degrees, the maximum cut depth is at 3.5 inches, while at 45 degrees it’s still 2.5 inches. The maximum dado width is 13/16 of an inch, and it can accept an 8-inch dado blade. The maximum rip capacity is 24.25 inches on the right side, and 12 inches on the left.
For safety, there’s the blade guard with riving knife, plus the anti-kickback pawls. It also comes with its own heavy duty stand. When you consider everything along with the 3-year warranty (with registration), it’s a great table saw for its price.
If you’re not a serious DIY hobbyist, you don’t have to pay serious money to get top of the range table saw. Find the best table saw under $500 on this list, and you’ll get yourself a bargain of a table saw you can use for many types of projects.